Week 9 HW: Cell Free Systems
##Part 1 1.Advantages of Cell-Free Over In Vivo Expression Cell-free protein synthesis (CFPS) removes the cell as a “black box” and allows you directly control and observe every variable in real time: pH, redox potential, ionic strength, and cofactor concentration.
2.Main Components and Their Roles
| Component | Role |
|---|---|
| Cell extract | Provides ribosomes, tRNA, synthetases, chaperones, and machinery |
| DNA/mRNA template | Encodes the target protein (plasmid or linear) |
| RNA polymerase | Transcribes DNA → mRNA (T7 RNAP is most common) |
| Amino acids | Raw building blocks for translation |
| Energy system | Supplies and recycles ATP/GTP to power translation |
| Salts and buffer | Maintains pH (~7.5) and ionic strength (Mg²⁺, K⁺ critical) |
| Additives | Chaperones, detergents, etc., added based on target needs |
3.Energy Provision and ATP Regeneration
Translation is enormously ATP-hungry: every peptide bond costs ~4 high-energy phosphate bonds. In a tube, the initial ATP pool depletes within 30–60 minutes, stalling ribosomes and collapsing yield.
Phosphocreatine / Creatine Kinase System
ADP + phosphocreatine → ATP + creatine (catalyzed by creatine kinase)
- Add phosphocreatine (~20 mM) and creatine kinase (~0.5 mg/mL).
- Extends productive reaction time from ~1 hour to 3–6 hours.
- Alternative: Maltose/maltodextrin system — a multi-enzyme cascade mimicking glycolysis, cheaper for large-scale reactions.
4.Prokaryotic vs. Eukaryotic Cell-Free Systems
| Feature | Prokaryotic (E. coli) | Eukaryotic (wheat germ / CHO) |
|---|---|---|
| Post-translational mods | None | Glycosylation, phosphorylation, etc. |
| Cost | Low | High |
| Yield | High | Moderate |
| Best for | Simple cytosolic proteins | Mammalian proteins, antibodies, GPCRs |
- Prokaryotic Choice — T7 RNA Polymerase: Straightforward cytosolic protein, no PTMs needed, high yield required.
- Eukaryotic Choice — Erythropoietin (EPO): Requires N-linked glycosylation for proper folding. A prokaryotic system would produce misfolded, inactive protein.
Designing Cell-Free Expression of a Membrane Protein
Membrane proteins are hydrophobic — without a lipid bilayer, they aggregate instantly.
Three Solubilization Strategies
- Detergent micelles (DDM, digitonin) — Simplest; add directly to reaction.
- Nanodiscs — Pre-assembled lipid bilayer discs; co-translate so protein inserts immediately.
- Liposomes — Lipid vesicles that capture the protein as it emerges from the ribosome.
##Part 2 Synthetic Minimal Cell: Gut Microbiome Inflammation Sensor
1. Function
1a. What It Does — Input and Output
A liposome-based synthetic cell that detects elevated reactive oxygen species (ROS) in the gut lumen — a molecular signature of intestinal inflammation — and responds by producing and releasing butyrate, a short-chain fatty acid that suppresses NF-κB signaling and restores epithelial barrier integrity.
| Feature | Description |
|---|---|
| Input | Hydrogen peroxide ($H_2O_2$) and superoxide — ROS elevated during gut inflammation (IBD, Crohn’s, colitis) |
| Output | Butyrate (butanoic acid) — anti-inflammatory metabolite that feeds colonocytes and suppresses immune activation |
Analogy: Think of it like a smoke detector hardwired to a fire sprinkler — the same signal that trips the alarm also triggers the response, with no human intervention needed. The synthetic cell is silent in a healthy gut and active only when and where inflammation occurs.
1b. Could Cell-Free Tx/Tl Alone Do This Without Encapsulation?
No. There are three primary reasons:
- Directionality: Without a membrane boundary, butyrate produced freely in solution would diffuse away immediately with no directional delivery to the epithelium.
- Protection: The ROS-sensing gene circuit would be exposed to gut proteases and nucleases, degrading within minutes.
- Threshold Control: There is no mechanism for threshold-gated release — the entire reaction would fire at once rather than responding proportionally to local ROS concentration.
1c. Could a Genetically Modified Natural Cell Do This?
Partially — but with serious limitations compared to a synthetic liposome:
| Feature | Engineered Bacterium | Synthetic Liposome Cell |
|---|---|---|
| ROS sensing | Possible via OxyR regulon | Possible via OxyR-driven promoter |
| Butyrate synthesis | Yes — multiple chassis | Yes — encapsulated enzyme pathway |
| Immune clearance | High — triggers innate immunity | Minimal — PEGylated lipids are inert |
| Replication control | Requires auxotrophy kill switch | Non-replicating by design |
| Gene Transfer | Risk of horizontal transfer | Zero risk |
| Regulatory path | Extremely difficult (GMO in gut) | More tractable as a drug delivery device |
1d. Desired Outcome
A synthetic cell administered orally (enteric-coated capsule) that survives transit to the colon, remains transcriptionally silent in healthy tissue, and activates butyrate synthesis specifically at inflamed foci where $H_2O_2$ exceeds threshold (~50 µM).
2. Component Design
2a. Membrane Composition
The membrane is designed to survive the harsh gut environment (low pH, bile salts) while remaining functional at 37°C.
| Lipid | Role | Mol% |
|---|---|---|
| DPPC | High-Tm structural lipid; bile salt resistance | 40% |
| POPE | Supports protein insertion; reduces curvature stress | 25% |
| Cholesterol | Rigidifies bilayer; reduces permeability | 25% |
| DSPE-PEG2000 | PEG brush layer; prevents immune recognition | 10% |
2b. Encapsulated Contents
The “cytoplasm” of the synthetic cell contains the following:
- Tx/Tl Machinery: E. coli cell-free extract (ribosomes, tRNA, chaperones), T7 RNA Polymerase, and the OxyR-responsive promoter plasmid.
- Pre-loaded Enzymes: Acetyl-CoA acetyltransferase (ThlA) for fast initial response.
- Small Molecules: Acetyl-CoA (2 mM), Phosphocreatine (20 mM) + creatine kinase (0.5 mg/mL), all 20 amino acids (5 mM each), and essential cofactors (NAD⁺/NADH, CoA).
2c. Tx/Tl System Origin: Bacterial (E. coli)
A prokaryotic system is preferred because the OxyR transcription factor and the butyrate synthesis enzymes (from Clostridium) are natively bacterial. No complex post-translational modifications (PTMs) are required, making the high-yield E. coli extract the most efficient choice.
2d. Communication with the Environment
- Sensing (IN — Passive): $H_2O_2$ crosses lipid bilayers freely via passive diffusion. Inside, it oxidizes OxyR, switching it from a repressor to an activator.
- Secretion (OUT — Active): We express VDAC-1 (voltage-dependent anion channel 1). While butyrate is anionic at physiological pH, the expressed VDAC-1 pores permit rapid efflux.
3. Experimental Details
3a. Complete Genes and Lipids
| Gene | Organism | Role |
|---|---|---|
| oxyR | E. coli K-12 | ROS-activated transcription factor |
| thlA | C. acetobutylicum | Step 1: 2 acetyl-CoA → acetoacetyl-CoA |
| hbd | C. acetobutylicum | Step 2: → 3-hydroxybutyryl-CoA |
| crt | C. acetobutylicum | Step 3: → crotonyl-CoA |
| bcd/etfAB | C. acetobutylicum | Step 4: → butyryl-CoA |
| ptb/buk | C. acetobutylicum | Steps 5–6: → butyrate |
| VDAC1 | H. sapiens | Membrane pore for butyrate efflux |
3b. Measuring System Function
Validation is performed through a tiered strategy:
- Tier 1: ROS-responsive expression: Use a GFP reporter to confirm the OxyR circuit activates at the ~50 µM $H_2O_2$ threshold.
- Tier 2: Butyrate synthesis: Quantify butyrate production in bulk extract using GC-MS or enzymatic assays.
- Tier 3: Pore function: Use ANTS/DPX dye efflux assays to confirm VDAC-1 correctly inserts into the liposome membrane.
- Tier 4: Integrated function: Measure butyrate secretion from encapsulated cells in simulated healthy (5 µM $H_2O_2$) vs. inflamed (100 µM $H_2O_2$) conditions.
- Tier 5: Bioactivity: Apply the output to Caco-2 cells and measure the reduction in inflammatory markers (IL-8/NF-κB).
##Part 3. Aura-Weave (Smart Medical Wearables)
1. One-Sentence Summary Pitch
Aura-Weave is a smart, disposable textile liner for adult incontinence garments that uses freeze-dried cell-free extracts to seamlessly detect and visually report urinary tract infections (UTIs) by changing color when exposed to infected urine.
2. How the Idea Works in Detail
The Aura-Weave liner features a middle diagnostic layer composed of a highly absorbent cellulose matrix (similar to filter paper). This matrix is pre-loaded with a lyophilized (freeze-dried) cell-free extract (CFE), specific engineered DNA circuits, and pH buffers.
The Mechanism:
- Dormancy: The system remains completely inactive on the shelf in its dry state.
- Activation: When the wearer voids urine, the warm liquid acts as the natural rehydration trigger, “booting up” the biological transcription and translation machinery.
- Detection: If specific UTI biomarkers are present—such as nitrites, leukocyte esterase, or bacterial quorum-sensing molecules—the genetic circuit is triggered.
- Visual Output: The circuit drives the rapid expression of a vibrant chromoprotein (like AmilCP). Within 45 to 60 minutes, a clear blue warning symbol permeates to the outer visible edge of the textile.
Visual Indicator: A blue symbol or color change alerts the caregiver immediately without requiring a manual diagnostic test.
3. Societal Challenge and Market Need
This addresses the “silent crisis” of UTIs in elderly, bedridden, and cognitively impaired populations (such as those with Alzheimer’s or dementia).
- Communication Barriers: These patients often cannot communicate early symptoms like pain or urgency, leading to delayed diagnosis.
- Medical Risks: Late-stage UTIs frequently progress to severe kidney infections, sepsis, and costly hospitalizations.
- Non-Invasive Monitoring: Aura-Weave eliminates the difficult, messy, and stress-inducing process of collecting a clean urine sample from an uncooperative patient, allowing for continuous, passive health monitoring in nursing homes and home-care settings.
4. Addressing Cell-Free Limitations
| Limitation | Aura-Weave Strategy |
|---|---|
| Water Activation | The Built-in Trigger: In this context, rehydration is a feature. The CFE stays inactive until the exact moment the patient urinates, ensuring the test only runs when a sample is provided. |
| Stability | Sugar Matrix Stabilization: To ensure a shelf life of over a year, the CFE and DNA are co-lyophilized with a stabilizing sugar (trehalose) and a strong buffer (HEPES), locking proteins in a stable, glass-like state at room temperature. |
| One-Time Use | Lifecycle Alignment: Incontinence liners are inherently single-use. The biological sensor’s lifecycle perfectly matches the textile’s lifecycle; once soiled and read, the garment is safely discarded. |
Technical Specifications
- Target Biomarkers: Nitrites, Leukocyte Esterase, Quorum-Sensing molecules.
- Reporter Protein: AmilCP (Chromoprotein).
- Time to Result: 45–60 minutes post-activation.
- Storage Requirements: Room temperature (stabilized via Trehalose).
##Part 4
- The Challenge: Current missions detect “bricks” (organic molecules) but not “factories” (active life).
- Strategy: Use FD-CF systems to detect ATP Synthesis and 16S rRNA genes.
- Reasoning: Only active biology synthesizes ATP; abiotic chemistry (like meteorites) might have organics but no coordinated metabolism.
- Experimental Plan: Compare Mars simulant spiked with extremophiles against sterile simulant and abiotic meteorite extracts.